Pigimatid/vibratsiooni matid Archives - Helivabrik

Comfort Mat AEROSPACE GALAXY 7 mm

Roger Rämson — Wed, 22 Oct 2025 08:46:32 +0000

Comfort Mat AEROSPACE GALAXY 7 mm is a multi layer vibro-acoustic material that combines effective anti-vibration properties with advanced sound insulation capabilities. It combines a modern vibro-acoustic mixture with foamed granules, a 2 mm thick sound insulation membrane and 100 micron aluminum foil with a matte finnish. Thanks to this combination, Galaxy provides a significant reduction in vibrations and noise transmission in a single layer. Galaxy achieves an acoustic loss factor (MLF) of 0.56 and also brings a significant improvement in sound insulation. Thanks to its design, it simultaneously reduces resonances and contributes to increasing the rigidity of large body surfaces. This makes Galaxy ideal for applications on the floor and rear wheel arches. It is also suitable for doors, where a significant improvement in acoustic comfort is required in a single layer. With adhesion strength of around 13 N/cm, it remains firm even in demanding conditions. The surface weight of 6.90 kg/m² represents a saving of 30 to 40% compared to traditional two-layer applications, which is essential especially in soundproofing electric and sports cars.

Layers:
– 100 micron foil
– 2 mm thick heavy membrane
– 5mm mastic with foamed granules
– adhesive glue

Thickness – 7 mm,
Sheet size – 480 x 320 mm,
Foil thickness: 100 microns.
Sheet weight – 1,06 kg ,
Weight – 6,90 kg/m2,
Adhesion – 13 N / cm,
Used as a single layer,
10 pcs in one pack.
Price is for 1pc.

Place to use:
Doors
Floor
Wheels arches

The post Comfort Mat AEROSPACE GALAXY 7 mm appeared first on Helivabrik.

Comfort Mat AEROSPACE Pulsar 5mm

Roger Rämson — Wed, 22 Oct 2025 08:43:07 +0000

Comfort Mat AEROSPACE PULSAR 5 mm is a universal vibroacoustic material from the new Aerospace series, which combines effective anti-vibration properties with advanced sound insulation capabilities. This combination in a single layer significantly simplifies application and brings high effect with minimal added weight. Pulsar is 5 mm thick and achieves an acoustic loss factor (MLF) of 0.45, which corresponds to top anti-vibration materials. The use of an advanced vibroacoustic layer with foamed granules brings high efficiency without the need for massive body loading, making it an ideal solution for places with medium to high vibration and noise loads – typically doors, roof, trunk floor. Pulsar also significantly reduces sheet metal resonances and, thanks to its high adhesive strength of around 15 N/cm, remains firmly adhered even in demanding conditions.
The surface weight of 4 kg/m² makes it an great choice for electric and sport cars or any other application where low weight is critical.

Layers:
– 100 micron foil
– 5 mm mastic with foamed granules
– adhesive glue

Thickness – 5 mm,
Sheet size – 500 x 320 mm,
Foil thickness: 100 microns.
Sheet weight – 0,65 kg ,
Weight – 4,06 kg/m2,
Adhesion – 15 N / cm,
Used as a single layer,
15 pcs in one pack.
Price is for 1pc.

Place to use:
Doors
Roof
Hood
Trunk lid
Trunk
Floor under rear seats

The post Comfort Mat AEROSPACE Pulsar 5mm appeared first on Helivabrik.

Comfort Mat AEROSPACE VOLT 2,5mm

Roger Rämson — Wed, 22 Oct 2025 08:31:13 +0000

Comfort Mat AEROSPACE VOLT 2,5 mm is the lightest and thinnest material from Aerospace series, which combines effective anti-vibration properties with advanced sound insulation capabilities. This combination makes Volt an effective solution for soundproofing vehicles where added weight is critical – typically in electric vehicles and sports cars.
With a thickness of only 2.5 mm and a surface weight of around 2.28 kg/m², Volt is ideal for the roof, doors, hood or trunk lid.

Layers:
– 100 micron foil
– 2,5 mm mastic with foamed granules
– adhesive glue

Thickness – 2.5 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 100 microns.
Sheet weight – 0,8 kg ,
Weight – 2,28 kg/m2,
Adhesion – 11 N / cm,
Water proof – YES.
Used as a single layer.
10 pcs in one pack.
Price is for 1pcs.

Place to use:
Doors
Roof
Hood
Trunk lid

The post Comfort Mat AEROSPACE VOLT 2,5mm appeared first on Helivabrik.

Comfort Mat AEROSPACE ZENITH 9 mm

Roger Rämson — Wed, 22 Oct 2025 08:53:06 +0000

Comfort Mat AEROSPACE ZENITH 9 mm is the most effective material in the Aerospace vibro-acoustic product range, combining advanced anti-vibration and sound insulation properties in a single layer. Thanks to its strong multi-layer construction, optimized for maximum vibration and noise isolation, Zenith is designed for the most stressed parts of the vehicle body, where the goal is to achieve top acoustic comfort without compromise. The total thickness of 9 mm, including a 3 mm heavy sound insulation membrane, allows for effective vibration absorption while significantly reducing the transmission of noise. The material achieves an acoustic loss factor (MLF) of up to 0.62, outperforming most conventional anti-vibration materials.
Zenith is particularly suitable for use on the floor, in the area of wheel arches or in the rear of the car, where significant reduction of noise is required in a single application.As a result we get a high efficiency while maintaining a reasonable surface weight of no more than 9 kg/m². This represents an average weight saving of 35-40% compared to conventional two-layer applications, which is important for soundproofing electric cars, sports cars and where low weight of the used materials is a priority.

Layers:
– 100 micron foil
– 3 mm thick heavy membrane
– 6 mm mastic with foamed granules
– adhesive glue

Thickness – 9 mm,
Sheet size – 480 x 320 mm,
Foil thickness: 100 microns.
Sheet weight – 1,38 kg ,
Weight – 9,00 kg/m2,
Adhesion – 13 N / cm,
Used as a single layer,
9 pcs in one pack.
Price is for 1pc.

Place to use:
Floor
Wheels arches

The post Comfort Mat AEROSPACE ZENITH 9 mm appeared first on Helivabrik.

Comfort Mat ATOM BOMB 4,2 mm

Roger Rämson — Thu, 11 Apr 2024 14:52:45 +0000

Comfort Mat ATOM BOMB 4.2 mm is an advanced multi-layer vibration deadening bitumen-mastic mat, highly effective in areas with high vibration load. It is a professional vibration deadening mat with high rigidy due to bitumen compound. Using mastic with modified elastomer give it a high mechanical loss factor, great adhesion, resistance to environment and a wide temperature range of work.
NB! Material must be heated up to 50C before installation.

Thickness – 4,2 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 100 microns.
Mechanical loss factor – 0.6,
Sheet weight – 2,4 kg,
Weight – 6,68 kg/m2,
Adhesion – 11 N / cm,
Water proof – YES.
Used as a 1st layer.
5 pcs in one pack.
Price is for 1pc.

Place to use:
Interior and trunk floor
Engine firewall
Wheel arches

EAN 4640107332510

The post Comfort Mat ATOM BOMB 4,2 mm appeared first on Helivabrik.

Comfort Mat BRONZE 2 mm

Roger Rämson — Thu, 11 Apr 2024 14:23:16 +0000

Comfort Mat BRONZE 2 mm is a budget mastic vibration deadening mat for zones with light or medium vibration loads.
Universal vibration deadening material with thickness of 2 mm has good adhesion to metal, mastic is made from a mixture of special polymers, reinforced with aluminum foil.
The use of a modified elastomer in the composition of the mastic gives the material a good mechanical loss factor, good adhesion, resistance to environment and a wide temperature range of work.
BRONZE series mats are not afraid of water, they have sealing and anti-corrosion features and dont need heating during installation.

Thickness – 2 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 60 microns.
Mechanical loss factor – 0.26,
Sheet weight – 1.10 kg,
Weight – 3.14 kg/m2,
Adhesion – 6 N / cm,
Water proof – YES.
Used as a 1st layer.
10 pcs in one pack.
Price is for 1 pcs.

Place to use:
Doors
Roof
Hood
Trunk lid

EAN 4640107332688

The post Comfort Mat BRONZE 2 mm appeared first on Helivabrik.

Comfort Mat BRONZE 4 mm

Roger Rämson — Thu, 11 Apr 2024 14:26:52 +0000

Comfort Mat BRONZE 4 mm is a bugdet mastic vibration deadening mat for zones with high vibration loads.
Universal vibration deadening material with thickness of 4 mm has a good adhesion to metal, mastic is made from a mixture of special polymers, reinforced with aluminum foil.
The use of a modified elastomer in the composition of the mastic gives the material a good mechanical loss factor, good adhesion, resistance to environment and a wide temperature range of work.
BRONZE series mats are not afraid of water, they have sealing and anti-corrosion features and dont need heating during installation.

Thickness – 4 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 60 microns.
Mechanical loss factor – 0.39,
Sheet weight – 2,64 kg,
Weight – 7.54 kg/m2,
Adhesion – 6 N / cm,
Water proof – YES.
Used as a 1st layer.
10 pcs in one pack.
Price is for 1 pcs.

Place to use:
Interior and trunk floor
Engine firewall
Wheel arches

EAN 4640107332701

The post Comfort Mat BRONZE 4 mm appeared first on Helivabrik.

Comfort Mat COBRA 2,3 mm

Roger Rämson — Thu, 11 Apr 2024 14:31:57 +0000

Comfort Mat COBRA is a 2,3mm vibration deadening mat with foil thickness of 120 microns.
It has an increased adhesion to metal, mastic is made from a mixture of special polymers.
The use of a modified elastomer in the composition of the mastic gives the material a high mechanical loss factor, excellent adhesion, resistance to environment and a wide temperature range of work.
COBRA mats are not afraid of water, they have sealant and anti-corrosion features and dont need heating during installation.

Thickness – 2,3 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 120 microns.
Mechanical loss factor – 0.40,
Sheet weight – 0,95 kg,
Weight – 2,71 kg/m2,
Adhesion – 14 N / cm,
Water proof – YES.
Used as a 1st layer.
10 pcs in one pack.
Price is for 1pc.

Place to use:
Doors
Roof
Hood
Trunk lid

EAN 4640107332435

The post Comfort Mat COBRA 2,3 mm appeared first on Helivabrik.

Comfort Mat EXTREME 3,5mm

Roger Rämson — Thu, 11 Apr 2024 14:57:03 +0000

Comfort Mat EXTREME 3,5 mm (EXTREME series) is a unique double layer vibration deadening mat, each layer has its special functional load. The mat is made of double lamination of a bitumen and mastic composition with aluminum foil (2 layest of foil), making it possible to create unique materials with high rigidy and high mechanical loss factor, used in areas with high vibration load, and for sound competition cars.
As a result we have the most effective mat as a 1st layer with a thickness of 3.5 mm. Using mastic with modified elastomer give it a great adhesion, resistance to environment and a wide temperature range of work.
NB! Material must be heated up to 50C before installation.
Thickness – 3.5 mm,
Sheet size – 500 x 700 mm,
Foil thickness: 2×100 microns.
Mechanical loss factor – 0.63,
Sheet weight – 2,25 kg,
Weight – 6,43 kg/m2,
Adhesion – 11 N / cm,
Water proof – YES.
Used as a 1st layer.
5 pcs in one pack.
Price is for 1pc.

Place to use:
Interior and trunk floor
Engine firewall
Wheel arches
SPL car can use them in doors, roof, trunk

EAN 4640107332527

The post Comfort Mat EXTREME 3,5mm appeared first on Helivabrik.

Comfort Mat EXTREME PRO 6 mm

Roger Rämson — Thu, 11 Apr 2024 15:04:21 +0000

Comfort Mat EXTREME PRO (EXTREME series) is a 6 mm double foil sound deadening mat with high rigidy used in areas with high vibration load, and for amateur and professional sound competition cars.
Using low-temperature processing technology with the addition of special polymers increased the mechanical loss factor and reduced the weight.
NB! Material must be heated up to 50C before installation.

Thickness – 6 mm,
Sheet size – 480 x 700 mm,
Foil thickness: 2×100 microns.
Mechanical loss factor – more than 0.75,
Sheet weight – 3.37 kg,
Weight – 9.63 kg/m2,
Adhesion – 11 N / cm,
Water proof – YES.
Used as a 1st layer.
5 pcs in one pack.
Price is for 1pc.

Place to use:
Interior and trunk floor
Engine firewall
Wheel arches
SPL car can use them in doors, roof, trunk

EAN 4640107332534

The post Comfort Mat EXTREME PRO 6 mm appeared first on Helivabrik.