1 x 20 mm2 toitekaabel (punane), 5 m
1 x 20 mm2 maanduskaabel (hõbedane), 0,8 m
1 x RCA stereoheli kaabel (must), topeltvarjestatud
1 x 0,5 mm2 kaugjuhtimiskaabel, 5 m
1 x Mini-ANL/AFS kaitsmehoidik
1 x 60 A Mini-ANL/AFS kaitse
Paigaldustarvikud

The post ESX HZ20WK 20mm2 kaablikomplekt appeared first on Helivabrik.

The post ESX HZ10WK 10mm2 kaablikomplekt appeared first on Helivabrik.

The active box is particularly convincing in convertibles with a small trunk because no additional space is required. The integrated Power4 module also offers all modern features that are necessary in many vehicles today. In addition to the start/stop, the variable EPS Pro is also on board to outsmart the error diagnosis of different vehicles. With over 400 watt RMS and excellent efficiency, the Class-D amplifier is optimally driving the Woofer. The bass level can also be conveniently controlled from the driver’s seat via the level remote control.

Specifications

• 2 x 20 cm (8”) Active Dual Bandpass System with Flex Port Technology
  Efficient Class D Mono Amplifier

• 1 x 400/800 Watts RMS/Max.

• Efficiency up to 84%

• LPF 40-120 Hz @ 12 dB

• Phase Shift 0°/180°

• Bass Boost 0-6dB @ 45Hz

• RCA Low Level Input

• High Level Input

• Auto Turn-On Function (DC or signal)

• Start-stop capable, 5 sec./ up to 7 Volts

• EPS PRO with 10R / 150R / 600R (switchable)

• Input Sensitivity 15 or 40 Volts (switchable)

• Triple Limiter Function, Clipping LED

• Bass Remote Controller

• 50 mm (1″) Voice Coils

• Subwoofers with Scooped Paper Cone

• Subwoofer Protection Grilles
  High-quality Logo Embroidery

• Robust Carpet Cover

• Dimensions 78 x 29 x 39/29 cm
  

Downloads

Owner’s Manual

The post ESX DBX208BPA 2×8” Bandpass Active subwoofer system appeared first on Helivabrik.

Compact QUANTUM amplifiers in Class D technology have been the spearhead of the ESX range for years. The range extends from the 4 x 300 watt RMS QE1200.4, which won an EISA award, to 1 ohm stable monoblocks, to the tiny QS-TWO, which can fit anywhere. The large selection allows many possible combinations. But that’s not all: ESX is now expanding the Quantum range with two more Class D multi-channel power amplifiers, which offer a whopping 6 x or 8 x 125 watts RMS at 2 ohms, top sound and the most modern features.

­

In this context, the new models of the QUANTUM QL series occupy a special position in the ESX range. Ideally, 6- and 8-channel amplifiers are configured so that they do not drive power-intensive 12- or 15-inch subwoofers, but rather develop their potential on 2- or 3-way systems. ESX multi-channel power amplifiers are designed to use the many channels and setting options to optimally supply tweeters, midrange speakers or woofers. In this configuration, they have significantly higher performance than might be assumed at first glance – specifically up to 160 watts RMS per channel. How is that possible? Very easy! By actively distributing the frequency ranges across multiple channels or speakers in the vehicle, all speakers never play at full power at the same time. In this case, the amplifier uses the power reserves of the generous power supply, which all channels can access if necessary. ESX calls this feature Dynamic Headroom Technology, or DHR for short.

If you decide to use, for example, four 2-channel models instead of an 8-channel amplifier, the DHR function or the dynamic performance gain would not be possible. This is because the power supply of the first amplifier is not able to also drive the channels of the second amplifier. Seen this way, 6- and 8-channel ESX amplifiers have a dynamic advantage in multi-channel applications.

If, for budget reasons, you still plan to provide a complete sound system for the vehicle, including a subwoofer, with just one Quantum power amplifier, this is also no problem thanks to the equipment and the ability to bridge all channels. It’s even possible. Control the bass level via a wired bass remote. We recommend the bridge of channels 5/6 with 250 watts of mono power for the QL800.6. The QL800.8 can do even more, thanks to the copy function it can provide 2 x 250 watts RMS at 4 ohms on the bridged channels 5/6 and 7/8 including bass control. If you want even more comfort and performance, you can combine the new multi-channel amps with a monoblock QL800.1, for example, which then confidently delivers up to 800 watts RMS per ohm.

The post ESX QL800.8 8 channel amplifier appeared first on Helivabrik.

Specifications

• 0.5 Farad Power Capacitor with integrated Distribution Block

• Operating voltage 12 – 15 V DC

• Operating temperature -20 ~ 60 ° C

• Digital voltmeter with 3 digits

• Connection for remote turn-on

• Sturdy acrylic holders

• Dimensions Installation diameter 6,5 x 13,6 cm

Distribution Block:

• 1 x Plus 16 mm² IN / 2 x 10 mm² OUT

• 1 x Minus 16 mm² IN / 2 x 10 mm² OUT

The post ESX DC500 0,5 Farad Power Capacitor appeared first on Helivabrik.

• 1.5 Farad Power Capacitor with integrated Distribution Block

• Operating voltage 12 – 16 V DC

• Operating temperature -20 ~ 60 ° C

• Digital voltmeter with 4 digits

• Auto Turn-On Function

• Sturdy acrylic holders

• Dimensions Installation diameter 7,4 cm x 24,5 cm

Distribution Block:

• 1 x Plus 25 mm² IN / 3 x 25 mm² OUT

• 1 x Minus 25 mm² IN / 1 x 25 mm² OUT

Downloads

Owner’s Manual

The post ESX DC1500 1,5 Farad Power Capacitor appeared first on Helivabrik.

• 10 Farad Hybrid Power Capacitor with integrated Distribution Block
  Operating voltage 11 – 16 V DC
  Impulse operating voltage up to 18 V DC

• Operating temperature -40 ~ 60°C

• Digital volt display with 4 digits

• Low internal resistance (ESR) < 6.5 mΩ

• Dimensions: 16,5 x 5,7 x 26.,0 cm

Distribution Block:

• 1 x Plus 50 mm² IN / 2 x 50/25 mm² OUT

• 1 x Minus 50 mm² IN / 2 x 50/25 mm² OUT

Downloads

Owner’s Manual

The post ESX VX10.0 PRO 10 Farad Hybrid Powercap appeared first on Helivabrik.